• This racket has 32 rings for inflating a huge number of small soap bubbles. The rain of bubbles looks extremely spectacular.

  • The 30 cm bubble maker has gathered our best experience, including:
    The combined composition of metal and plastic is greatly complimented by our patented bead coating. Having 32 rings on a 30 cm racket is definitely a record! We haven't had it even in a welded construction.

    The distance between the rings is accurately calculated that way, so that the bubbles do not stick together while inflating. Each ring is capable of inflating several bubbles during the swing. In total, there should be about 100 bubbles for 2-3 swings with one dip into the solution.

    We have reduced the weight with the help of a plastic case. The construction is stable, firm and cannot be disassembled. It doesn't have any bolted-type connections which makes it look especially aesthetic.

    The racket will perfectly fit into the overall concept of your soap bubble show program. You can implement it after a block of small racket tricks or before giant bubbles block. A gorgeous rain of bubbles is a wonderful culmination of any block of tricks or performance itself.
    This racket has 32 rings for inflating a huge number of small soap bubbles. The rain of bubbles looks extremely spectacular.

  • About new technology for making rackets
    The rackets are made of steel and have a handle made of two metal rods, which allows the handle to bend less under load. Using two rods instead of one made it possible to change the shape of the handle. The handle has become wider, the racket fits comfortably in your hand, which allows you to hold the racket better, even with wet hands. Because of this shape, the racket spins less in the hand.

    In addition, the handle has a textile coating, that is why now the handle slides less in the hand. It's not a secret that the artists of the soap bubble show nearly always have wet hands. When you take the racket in your hand, excess moisture is absorbed into the textile, which reduces the sliding of the racket in your hand, even if your hands are wet.

    Nevertheless, the main advantage of our rackets is the "bead coating" on the absorbent part of the rackets. The new technology allows rackets to absorb two times more solution, which gives the following results:

    The number of bubble blowouts per one racket dipping into soap solution increased by 2-3 times.

    The length of the bubble stretched from the racket (trail) increased by 2 times.

    The holding time of the bubble hung up on the racket increased by 1.5 times (which allows you to blow in more bubbles).

    We officially patented the new racket coating at The Russian Federal Service for Intellectual Property in June 2020.

  • About our patent
    We wanted to improve the technology of making rackets to improve the outlook, increase the absorbency and eliminate the spinning of the handle in the hand while working with large rackets. We also found out that the design of painted rackets is outdated and requires improvements.

    When we tested the new "Arista" concentrate, we did many tests. During testing the soap solution we included in the tests different materials and methods of applying them on the racket. Based on the results of long-term testing, we came up with a new technology of an absorbent layer for soap bubble show rackets, which we decided to patent.

    Patenting is a long process. During the first wave of lockdown, we discussed the patent text with lawyers for about 2 months, thought over each word, because the text is not subject to editing after submission to the registration authority. There is always a risk that the patent will not even be accepted for consideration. We submitted the patent text in June 2020 and after initial review, we were told to wait about a year for final confirmation, but 3 months later in September 2020, we recieved the news that our patent was approved. Then it took another 1.5 months to get the document This is our first experience of patenting and we are very happy that it was successful one. There is a statement at the end of the document that the validity period expires on June 19, 2030. And this is not a big deal, by that time we will have invented something else.
Do you want to become the dealer of our company and represent our brand in your city or in your country?

Weight
320 гр
Frame material
plastic
Disassembled size
31*42*10 cm
The absorbent layer
Bead coating